Filming setup
My Motorcycle POV Setup: Camera, Mic Placement and Editing
Where I mount my camera and microphone on a stock Classic 350, how I edit in DaVinci Resolve, and what to check before filming your own ride.

These editorial illustrations explain the filming setup. Equipment shapes and mounting details are schematic.
A motorcycle POV film has two viewpoints: what the camera sees and what the microphone hears. Getting those in the right places matters as much as choosing the equipment.
I film rides in France on an Emerald Green Royal Enfield Classic 350. My setup uses a DJI Osmo Action 6 on a helmet chin mount, a DJI Mic 3 on the rear mudguard behind the number plate, and DaVinci Resolve for editing and custom colour grading.
The bike is fully stock, including the exhaust. Here is the setup, followed by a practical way to work out what will suit your own rides.
My motorcycle POV setup at a glance
- Camera: DJI Osmo Action 6.
- Camera placement: helmet chin mount.
- Microphone: DJI Mic 3.
- Microphone placement: rear mudguard, behind the number plate.
- Filters: DJI ND filters, used when the light calls for them.
- Editing: DaVinci Resolve with custom colour grading.
- Motorcycle: Royal Enfield Classic 350, Emerald Green, fully stock.
Camera placement: the helmet chin mount

My camera sits on the chin of the helmet. For a first-person ride, the framing needs to give viewers enough of the road to follow the journey, with the motorcycle providing a sense of where they are.
Before copying any camera position, record a short clip while sitting on your parked bike in your usual riding posture. Review it on a larger screen.
Can you see the road ahead? How much of the frame is filled by the tank and instruments? Does a normal glance move the view away from the scene you want to capture?
A small angle adjustment can change the composition considerably. It is easier to spot that in a test clip than after a full ride. Use a mount suitable for your helmet and camera, and keep the setup clear of your vision and controls.
Microphone placement: behind the number plate

My DJI Mic 3 sits on the rear mudguard behind the number plate. The aim is to capture the engine and exhaust while keeping the microphone away from direct wind.
That location is a starting point. The plate, bodywork, exhaust position and airflow all change what a microphone hears on a different motorcycle.
The Mic 3 is omnidirectional, meaning it picks up sound from around it. Placement therefore affects the balance between the engine, surrounding traffic, wind and mechanical noise. DJI's Mic 3 FAQ confirms its pickup pattern.
For your own setup, review a short recording for three things:
- Wind rumble: a low rushing sound that covers the engine.
- Rattles: vibrations from the mount or nearby parts.
- Distortion: a harsh or crackling sound when the engine gets louder.
Try changing one thing at a time, such as position, wind protection or recording level. That makes it easier to understand what helped.
Secure the microphone away from moving parts and exhaust heat. A useful recording position also needs to stay secure throughout the ride.
Yes, the exhaust is stock
My Classic 350 has its original exhaust. The sound you are trying to record does not need to come from an aftermarket system to be interesting.
For a quiet POV film, the character comes from the whole ride: the engine, changes in pace, traffic and the spaces between those sounds. Clean capture helps viewers hear that character.
You can listen to a Classic 350 stock-exhaust night ride on the channel.
Night footage: judge the moving picture
A bright-looking frame is only one part of useful night footage. Streetlights, headlights and darker stretches can appear within the same ride.
When testing your own settings, include a lit street and a darker section. Review the moving footage rather than choosing a setup from one paused frame.
Look at whether road markings remain readable, bright lights lose their detail, and darker areas become distracting. Change one setting at a time and compare clips from similar conditions.
I keep ND filters in my kit, but they are optional. They reduce the light entering the camera, so decide whether the conditions need that reduction before adding one. Carrying a filter does not mean every ride benefits from using it.
Editing in DaVinci Resolve
I edit in DaVinci Resolve and use custom colour grading. The look is part of the film, alongside its pacing and sound.
If you are starting your own editing workflow, work through the footage in this order:
- Choose the sequence. Keep the moments that help viewers follow the ride.
- Check the audio. Listen for wind, rattles and distracting changes in level.
- Correct the image. Adjust exposure and white balance before adding a stronger colour look.
- Review the whole edit. Check transitions between bright and dark scenes, then watch it on a phone as well.
A colour grade should work across the sequence. One attractive frame is less useful if the next shot feels disconnected from it.
A short test before a full ride
Before committing to a longer film, make a short test with the equipment you already have.
Check the camera angle while parked, record a brief ride, then review the picture and audio together. Choose the biggest problem and make one adjustment before testing again.
If the framing works but wind covers the engine, start with the microphone. If the sound works but too little of the road is visible, start with the camera angle. Let the recording show you what needs attention.
See the filming gear I use. That page contains affiliate links. As an Amazon Associate I earn from qualifying purchases.
Where do you mount your camera and microphone? Join the conversation in the YouTube comments.
